Are your game controller buttons sticking and affecting your gaming experience? Don’t worry, as there are alternative methods to clean them without relying on rubbing alcohol. We will learn a comprehensive guide on how to clean Sticky Controller Buttons without rubbing alcohol in today’s article. So, stay tuned here!
Use Alternative Cleaning Solutions
While rubbing alcohol is often the go-to solution for cleaning sticky controller buttons, there are alternative cleaning solutions that can be just as effective. These include:
Step 1- Vinegar And Water Mixture
- Firstly, mix equal parts white vinegar and water in a spray bottle or small bowl.
- Then. dampen a clean cloth or cotton swab with the mixture and gently wipe the sticky buttons.
- Keep in mind that dry thoroughly with a soft cloth.
Step 2- Baking Soda Paste
- You need to mix baking soda with enough water to form a thick paste.
- After this, apply the paste to the sticky buttons, let it sit for 10 minutes, and then gently scrub with a soft-bristled toothbrush or cloth.
- Remember to rinse with water and dry entirely.
Step 3- Hydrogen Peroxide Solution
- Notably, you can make a hydrogen peroxide solution by mixing an equal quantity of hydrogen peroxide and water.
- Afterward, dampen a cloth or cotton swab with the solution and gently wipe the sticky buttons.
- At last, don’t forget to dry thoroughly before reassembly.
Through all these, you come to know how to clean sticky controller buttons without rubbing alcohol. If you want to clean it more or there is some need for cleaning after these steps, just do Dissembling.
Disassembling The Controller
Consider disassembling the controller for a more thorough cleaning. Here’s how to do it safely:
Tools Required
- Small Phillips head screwdriver
- Flathead screwdriver
- Cotton swabs
- Microfiber cloth
- Mild dish soap
- Warm water
Steps For Dissembling
- Initially, turn off the controller and remove any batteries or cables.
- Notably, use the Phillips head screwdriver to remove screws on the back of the controller.
- You need to then carefully pry open the controller using a flathead screwdriver.
- Then, Separate the front and back halves, disconnecting any cables if necessary.
- Now, clean the sticky buttons and surrounding areas with a damp cotton swab and mild dish soap solution.
- Keep in mind that dry simply with a microfiber cloth before reassembly.
Clean The Buttons And Controller Casing
If you want to quickly clean without disassembly, follow these steps:
A Soft Cloth
- Firstly power off the controller and remove any batteries or accessories.
- Then, use a clean, lint-free, and slightly damp cloth to gently wipe the buttons and casing. Notably, don’t forget to dry before reassembly.
A Toothbrush
- Similarly, turn off the controller and remove batteries or accessories.
- Then, you have to use a spare toothbrush with soft bristles to gently brush the sticky buttons and casing.
- Lastly, wipe with a clean cloth to remove loosened debris.
Dry And Reassemble The Controller
After cleaning, you have to ensure proper drying and reassembling. For which below are the steps:
Air Drying
- Initially, place the cleaned controller in a well-ventilated area to air dry for at least 24 hours.
- Notably, avoid direct sunlight or heat sources.
Reassemble Steps
- Firstly, you need to carefully reattach buttons, membranes, and cables as necessary for reassembling.
- After that, tighten the screws securely but not excessively.
- Then, test buttons before reattaching batteries or cables.
Preventions For Sticky Buttons in The Future
Absolutely all earlier methods help to figure out the question “How to Clean Sticky Buttons without rubbing alcohol?”
Regular Cleaning Routine
Don’t forget to clean your controller every few weeks with a soft cloth and mild soapy solution. This will help your controller to stay in the best condition.
Avoid Spilling Liquids
Keep in mind that take liquids away from your gaming area to prevent spills that can damage the controller.
Use Controller Covers
Remember to invest in a controller cover to protect it from spills and reduce direct contact with oils and sweat.
Bottom Line
I hope that the guide on how to clean sticky controller buttons without rubbing alcohol gives real-time information and it would be helpful for you.
