How to Connect Skullcandy Wireless Earbuds: A Simple, Step-by-Step Guide
Listen! So you’ve found a shiny new pair of scalkandy wireless earplugs, and you’re ready to call without your favorite songs, podcasts or stars. You have no idea about How to Connect Skullcandy Wireless Earbuds. It is super easy to connect them to your device, but if you are new to Bluetooth earplugs or just want to make sure you are right, I have covered you.
This guide is packed with all the details you need to connect your scalkandy earplugs to your phone, laptop or tablet, as well as some troubleshooting tips to keep things smooth. Let’s get started!
Why Skullcandy Wireless Earbuds Are Awesome?
Skullcandy earplugs are known for their smooth design, good sound quality and user -friendly features. Whether you have found Dime, SESH EVO, Indie Evo, Push Active or any other model, they use Bluetooth to connect wirelessly to your equipment. Most models also come with multipoint combination (connects two devices at a time), tile tracking to find lost earplugs and even cool features like a sclashy app. But before you can enjoy all this, you have to pair them properly. Don’t worry – it’s easy for you!
Related: How to Connect Skullcandy Wireless Earbuds
Step-by-Step Guide How to Connect Skullcandy Wireless Earbuds
There are step by step guidence of How to Connect Skullcandy Wireless Earbuds?
Step 1: Charge Your Earbuds
Before pairing, make sure your earbuds have enough juice. A low battery can cause connection issues.
- Keep earplugs in the charging case: Pop both earbuds in their case. Check LEDs on earplugs – they must be red to charge. If they do not, make sure the case is charged (connect it to the USB charger, which does not exceed the power output 18W, such as 5V/3.6A).
- Lad for 30 minutes: For first use, for first use, charge them for about 30 minutes to make sure they are ready. Most Slakandy year bids, such as Dime or Indie Evo, have quick costs-10 minutes cost give you a game of 1-2 hours.
- Check the case Battery: Some models, such as ZIB TRUE, is a case LED that shines to display the battery level (1 flash = less, 2 = medium, 3 = high).
Step 2: Put Your Earbuds in Pairing Mode
To connect to a device, your earbuds need to be in “pairing mode” so your phone or laptop can find them. The way to do this depends on your Skullcandy model.
- For most true wireless earbuds (e.g., Dime, Sesh Evo, Indy Evo, Push Active):
- Remove both earbuds from the charging case. They should automatically have strength and sink with each other (you want to see blue LEDs). A vote can say signal “couple.”
- If they do not enter the interconnection mode, keep the button or touch sensor on both earbuds for 4-5 seconds and until the LED flash is red and blue. For some models, only left earplug will be red/blue flash.
- For earbuds with a wire or button controls (e.g., Method Wireless):
- For 5-7 seconds, press and hold the main button/function button and press until LED turns red and blue.
- Model-specific tips:
- Skullcandy Dime: Remove from the case, or turn off manually (hold both buttons for 4 seconds), and hold back for 4 seconds to get into the Pair mode.
- Sesh Evo: Press and hold each earbud for 10 seconds to reset and enter pairing mode if they don’t pair automatically.
- Push Active or Mod: Use the Slakandy app or press an earplug once, then hold for 1 second to set the interconnection mode for another device (multi -point starring).
If you’re unsure how to enter pairing mode for your specific model, check the user manual or visit Skullcandy’s support website for digital guides.
Step 3: Enable Bluetooth on Your Device
Now that your earbuds are in pairing mode, it’s time to get your device ready.
- On Android:
- Open Settings > Bluetooth (or swipe down to the Quick Settings panel and tap the Bluetooth icon).
- Turn Bluetooth on. Your device will search for nearby devices.
- Look for your earbuds (e.g., “Dime,” “Sesh Evo,” “Indy Evo”) in the list and tap to connect. Accept any “Pair” or “OK” prompts.
- On iPhone/iPad:
- Go to Settings > Bluetooth.
- Turn Bluetooth on and wait for your earbuds to appear under “Other Devices.”
- Tap your earbuds’ name to pair. You’ll hear a “Connected” voice prompt.
- On Windows PC:
- Go to Start > Settings > Devices > Bluetooth & other devices.
- Turn Bluetooth on and click Add Bluetooth or other device > Bluetooth.
- Select your earbuds from the list. Follow any on-screen prompts to complete pairing.
- On Mac:
- Click the Apple menu > System Preferences > Bluetooth.
- Turn Bluetooth on and select your earbuds from the list. Click Connect.
Pro Tip: If your device doesn’t have Bluetooth (e.g., an older desktop), you’ll need a Bluetooth adapter. Most modern laptops and phones have Bluetooth built-in.
Step 4: Confirm the Connection
Once paired, you’ll hear a voice prompt like “Connected” from the earbuds, and they’ll appear in your device’s Bluetooth settings as connected. Play some music to test the sound. If both earbuds are working in stereo (sound from both), you’re good to go!
Related: What are the Best Earbuds for Bass and sound quality 2024
Connecting to Multiple Devices (Multipoint Pairing)
Some Skullcandy earbuds, like the Mod or Push Active, support multipoint pairing, which lets you connect to two devices at once (e.g., your phone and laptop). This is super handy for switching between calls on your phone and music on your laptop without re-pairing.
- How to set up multipoint pairing:
- Pair your earbuds with the first device as described above.
- While the earbuds are powered on and connected to the first device, press either earbud once, then press and hold for 1 second. The earbuds will re-enter pairing mode (voice prompt: “Ready to Pair”).
- On the second device, go to Bluetooth settings and select your earbuds.
- The earbuds will now switch automatically between devices. For example, if you’re watching a video on your laptop and get a call on your phone, the earbuds will prioritize the call and pause the video.
Note: Not all models support multipoint pairing, so check your earbuds’ manual or Skullcandy’s website to confirm.
Using the Skullcandy App
The Skullcandy App (available on iOS and Android) takes your earbuds to the next level. It’s not required for pairing, but it’s worth downloading for extra features.
- What the app does:
- Customize sound with EQ modes (Music, Podcast, Movie, or a 5-band custom EQ).
- Enable Stay-Aware Mode to hear your surroundings without removing an earbud.
- Use Tile tracking to locate lost earbuds by playing a sound (requires the Tile app).
- Update firmware for better performance.
- Set up hands-free voice controls (e.g., “Hey Skullcandy, play Spotify”).
- Customize button actions, like using an earbud to take photos remotely.
- How to use it:
- Download the Skullcandy App from the Apple App Store or Google Play Store.
- Pair your earbuds to your phone first, then open the app. It should automatically detect your earbuds.
- Follow the on-screen prompts to link your earbuds and explore features.
Tip: Keep the app running in the background (especially on iOS) for voice controls to work.
Troubleshooting Common Pairing Issues
There are some issues of How to Connect Skullcandy Wireless Earbuds?
Issue 1: Earbuds Won’t Enter Pairing Mode
- Solution:
- Make sure earplugs are charged and are not connected to any other device. Turn off Bluetooth on other surrounding devices (eg tablet or other phone).
- Reset the earplugs: Keep them in the case, make sure the LEDs are red, and then press the button/touch sensor on each earplug for 10 seconds until LED is red and blue.
- Check the manual or scalandy site for model-specific coupling instructions.
Issue 2: Device Can’t Find Earbuds
- Solution:
- Make sure Bluetooth is turned on and your device is in the area (within 30 feet/10 m).
- Go away from the USB 3.0 port or other electronics that can interfere with Bluetooth signals.
- Forget the earbuds in the Bluetooth settings on your device and add them again. Go to Bluetooth settings, select the earbuds and select “Forget” or “Apply”. Then repeat the coupling process.
Issue 3: Only One Earbud Plays Sound
- Solution:
- Sink the earplugs again: Hold in the case of both until the LED turns red and remove them together. If he does not work, press the button on both earplugs 4 times to sync again (LED red/blue will be blue together).
- Reset the earbuds: Follow the reset instructions for your model (usually involves holding the button for 10 seconds or tapping several times).
- Make sure that the earplugs are clean and that ear gels are properly connected, as they lack can affect charging and synchronization.
Issue 4: Earbuds Ask for a PIN
- Solution:
- Skullcandy earplugs usually do not require PIN. If specified, try “0000” or “1234”. If he doesn’t work, forget the earbuds in your Bluetooth settings and add them again.
- Reset the earplugs to clean any coupling problems (see the reset instructions above).
Issue 5: Connection Drops or Stutters
- Solution:
- Reset the earplugs to clean any coupling problems (see the reset instructions above).
- Charge both earplugs and the case, as low battery can cause dropout.
- To cure connectivity, update firmware to the earplugs through the Skullcandy app.
Cool Features to Explore After Pairing
Once your earbuds are connected, here are some awesome features to try:
- Solo Mode: Use an earplug (left or right) for calls or music under other charges. Just remove an earplug from the case, and it works in Mono mode.
- Voice Assistant: Triple-loss an earbud to activate Siri, Google Assistant or Alexa.
- Spotify Tap: On a model like Push Active, keep the left earbug for 1 second to play Spotify (the app requirements) immediately.
- Water Resistance: Many models (eg push-active, method active) are sweaty and water repellent (IPX7), perfect for workouts.
- Tile Tracking: If you lose an earbud, use the Tile app to play audio (must be within the Bluetooth series).
Final Tips for a Great Experience
- Keep everything charged: Always keep your earbuds in case when they are not used to charging and preserving.
- Update firmware: To improve performance, check the Skullcandy app regularly for firmware updates.
- Clean your earbuds: Wipe charging stick and ear gels to prevent connection problems.
- Store properly: Use a case or string (including models such as crown) to avoid losing your earbuds.
Wrapping It Up
How to Connect Skullcandy Wireless Earbuds: When you know the steps, it is an air to connect your sklashy wireless earplugs. Just charge them, insert them into the interconnection mode and connect through the Bluetooth settings on your device. With features such as Multpunneling, Scalandy App and Tile tracking, these earbuds are more than just luxurious sounds – they are a whole vibio.
If you are killing any snag, troubleshooting tips given above should take you back to the track. Pop those earbuds, crank your playlist and enjoy the wireless freedom!
